Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Plywood Thickness #26932

    Does Greg buy shim stock or make the spacers himself?

    rick

    in reply to: Inserts on UPPER cabinet carcass sides #24566

    OK, got it Greg. Outside versus Captured now makes sense. The variable that was making it confusing was I had protected the sides. They didn’t behave as they should have.

    Thanks,
    Rick

    in reply to: Inserts on UPPER cabinet carcass sides #24563

    Greg, I attached a text file with two pictures. One shows tenons on top/bottom of carcass side, the other shows tenons on the ends of the shelves. Sometimes it does it one way, sometimes the other.

    When the tenons are on the carcass sides instead of the shelves, the CNC can’t cut both the tenons (cut from outside of carcass side) and the the holes/slots (cut from the inside of the carcass side)

    Rick

    Attachments:
    You must be logged in to view attached files.
Viewing 3 posts - 1 through 3 (of 3 total)