Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: New work methods, hardware questions #8059

    Greg, this is great information, Thanks! The videos are extremely helpful, would you have more of them? Also, what are the screws you are using to attach the cabinet backs?
    Thanks,
    Todd

    in reply to: Drawer Fronts #7885

    Hi Joe,
    Any chance on getting an explanation on how to get cabwriter to do the arithmetic on the openings? Thanks!
    Todd

    in reply to: drawer box #7672

    Hi Joe,
    Yes, I am a beta tester. I had installed the 12/8 version on Monday, but could not get it to create cabinets. I eventually uninstalled and went back to my previous version so I could continue working.

    in reply to: Drawer Boxes and Fronts in a 2 Drawer Bank #7666

    For file drawers, i have been using a standard cabinet with doors and shelves set at “0”. then I add the drawers manually. This way I do not need to modify cab writer settings for mid rails. I would think you would need to modify the drawer fronts manually to get the solution you are requiring.

    in reply to: Drawer Fronts #7665

    Thanks Joe,
    A video would be great. I haven’t figured out how cab writer does the math…

    in reply to: Connector Stile spacing #6589

    Hi Greg,
    Here is the file. The problems see to be the upper wall cabinets. i end up with openings on each that are a 1/2″ different in size.
    Thanks,
    Todd

    Attachments:
    You must be logged in to view attached files.
    in reply to: Beaded faceframes #2389

    Hi Greg, Thanks for the reply.
    We don’t actually notch the rails or stiles. We mill a separate piece of stock 1/4 x 3/4 with the bead on one end then glue and pin nail to the inside perimeter of the frame openings. The extra material isn’t so much of an issue as the door and drawer fronts and boxes change size due to the openings losing the 1/2″ in width and height.
    Thanks again,
    Todd

    in reply to: Beaded faceframes #2384

    Sure thing – here you go.

    Attachments:
    You must be logged in to view attached files.
    in reply to: toe kick drawers #642

    No problem, just trying to add comments as I am working thru some plans.
    Thanks!

Viewing 9 posts - 1 through 9 (of 9 total)