Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #7667

    When using an inset bottom value, the bottom drawer box does not move up accordingly. The hardware holes do, but not the drawer box. Also, when manually adding a drawer to a cabinet with a raised bottom the hardware holes and the drawer box do not move up accordingly.

    #7671
    chiefwoodworker
    Keymaster

    Hi Todd,

    Good catch! I’ll add those to the bug list and they should be fixed in the next 2.00 Beta release. Are you a Beta tester?

    Joe….

    #7672

    Hi Joe,
    Yes, I am a beta tester. I had installed the 12/8 version on Monday, but could not get it to create cabinets. I eventually uninstalled and went back to my previous version so I could continue working.

    #7673
    chiefwoodworker
    Keymaster

    Oooooo! That’s not good. When you are not too busy and have time to try it again I can help you; either vial phone or with an on-line join.me session. Let me know when you are ready.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.