So, the Door/Drawer Front Top (& Bottom) Clearance parameters do not affect anything when the Cabinet Style is Overlay?
Also, I don’t understand the Base Drawer Front Heights on the Face Frame tab. I want a 7 1/16″ high drawer front. In order to achieve that, I need to subtract 2x the overlay,
subtract 2x the Door/Drawer Gap, and subtract the desired reveal from 7 1/16″ and enter that value in the drawer front height on the Face Frame tab. So, in my case:
– 2 1/2 (2x 1 1/4″ desired overlay)
– 3/16 (2x 3/32 door/door gap from Project tab)
– 1/2 (desired reveal)
= 4 3/8